Select Right Wood For Homeowner Fence Repair Near Me

There are many different types of wood lumber and grades available at your local home improvement store so it is important to know the important items when purchasing the materials for your repair. Visit us on Fence Repair near me.

Pressure Treated Lumber

Pressure treated lumber is chemically treated to inhibit fungal growth and insect activity. The three common types of pressure treatment are ACQ (alkaline copper quaternary), CA (copper azole), and the newest type is MCQ (micronized copper quaternary). There are different grades of pressure treatment and proper selection depends on the severity of the location and how the wood will be exposed to the elements.

Fence Posts

When we consider the privacy fence for most homeowners, the fence post is the most critical element. The post bears all of the stress from wind gusts and is exposed to moisture and insects underground that can cause the post to deteriorate and weaken. Wood fence posts should be pressure treated and rated for ground contact. This is commonly listed as AWPA grade UC4A; the preservative retention requirements are listed below:

-ACQ retention of 0.40 lb/ft3 (PCF)

-CA-B retention of 0.21 lb/ft3 (PCF)

-CA-C retention of 0.15 lb/ft3 (PCF) under the Wolmanized brand

Note that the MCQ pressure treatment method has not been rated by the AWPA standard.

What about cedar posts? The quality of wood coming out of the lumber mills has declined significantly over the past 20 years – it used to be that you could get old growth heart wood (from the center of the tree) that would last for decades as a post, but today the quality is simply to variable to recommend using cedar or other naturally rot-resistant wood. Most of the trees brought into the mill are from 10-year re-growth and the posts will contain very wide rings from the sapwood layer that simply will not last.

To ensure your fence will stand for 10 years or more without worry the best method is to use pressure treated 4″ x 4″ pine posts that have the proper AWPA grade of UC4A. For severe locations that hold moisture, such a low-lying areas or where there is heavy clay soil with you may choose to go with UC4B grade posts for extra rot resistance as a higher cost.

When you are shopping for your fence posts you will probably find green pressure treated 8′ landscape timbers nearby and think to yourself “those timbers are a lot cheaper than these 4″ x 4″ pressure treated pine posts, I’ll just save some money and use the landscape timbers” – RESIST that thought. The landscape timbers may last for 1-3 years but will certainly be weaker and fail sooner than the proper pressure treated pine post.